Tsugami SS32 Swiss Turning Center
Technical Specifications

General

1.25 inch (32mm) bar diameter capacity
13.5 Inch (342.90mm) Stroke per chuck standard, with 21inch (533.40mm) possible.
12 feet (3.657m) bar feeder with 15" magazine capacity
Guide bushing equipped
Sub spindle equipped
Run time capacity 23 hours (+-.5 hours) for certain parts
Parts conveyer
Chip conveyer

Tooling - Main spindle

• 5 live cross Drills
• 2 live angle drilling
• 8 turning tools
• 5 end drills
• Slitting saw up to 1.75 inch (44.45mm)
• All live tools capable of rigid tapping

Sub spindle

•  6 end working tools (5 additional available) 3 of which can be live
• 2 cross working tools

Axis

• Full c axis on both spindles.  Both programmable to .001 degree
• Phase synchronous transfer allows features to align to both ends of part.

Operations

• Turning
• Drilling
• Threading
• Knurling
• Broaching
• Milling, Thread milling (cross and face)
• Engraving
• Complex surface milling